Flotide Inverter PX pool heat pump – When a €50,000 pool investment meets 6 weeks of use

If your pool is a €50,000 decorative vase (cold = unused).

If you miss May + September (water 19°C = too cold).

If you hate cold shock (carefully dipping your toe into the water = overcoming the challenge).

If you want 5 months of swimming season (instead of 6 weeks of lucky weather).

They built a pool (investing €50,000 – concrete, tiles, technology).

The problem:

Problem #1: Pool is unusable for 7 months/year
May: Water 18-20°C (too cold – children refuse to swim). June-August: 24-26°C (perfect – you swim). September: Water drops to 19°C (too cold again). October-April: 8-15°C (pool is a dead space in the garden). Total: Pool is only really usable for 6-8 weeks/year (when the weather is perfect). You have a €50,000 decorative vase in the garden.

Problem #2: Cold shock = daily struggle
Even in the height of summer (July): In the morning the water is 22°C (without a heat pump – it cools down overnight). You want to swim → stand at the edge of the pool → carefully dip your toe in → "Brrr, cold!" → 5 minutes of willpower → finally jump in → cold shock → it only becomes comfortable after 10 minutes of swimming . The same struggle every day.

Problem #3: Solar film alone is not enough
They have a solar pool cover (€200, black, bubble-free). Advantage: Prevents heat loss at night (retains 2-3°C of heat). Problem: Does NOT generate new heat → if the water is 18°C ​​in May → the solar cover keeps it at 18°C ​​(prevents cooling) → but doesn't heat it up to 26°C . They miss out on May and September (the pool stays cold).

Problem #4: Electric heating element = €500/month electricity costs
Alternative: Electric immersion heater (9 kW, €2,000). It works (heats the pool to 28°C). But: 9 kW x 8h/day = 72 kWh/day x 30 days = 2,160 kWh/month x €0.35/kWh = €756/month in electricity costs . After 3 months of the season: €2,268 in wasted electricity. Priceless.

There is a solution. One that transforms the pool from "6 weeks of use" to "5 months of use" – for the same cost as a coffee to go.

The Flotide Inverter PX heat pump – the full inverter heater (extracts heat from the outside air instead of burning electricity). Its special features: COP 13.6 (1 kW of electricity produces 13.6 kW of heat – 13 times more efficient than an electric heating element), full inverter (stepless output 20-100% – adjusts automatically), extremely quiet at 19 dB at 10m (inaudible – quieter than a refrigerator), Wi-Fi + app (you set the target temperature – the pump regulates automatically), suitable for year-round use down to -15°C (works even in winter).

What you will receive:

• 5 months of bathing season instead of 6 weeks – May to September at 26-28°C (instead of only July-August)
• COP 13.6 = 13x more efficient than a heating element – ​​1 kW of electricity produces 13.6 kW of heat (the magic of the air-source heat pump)
• Operating costs €50-80/month – instead of €756/month for an electric heating element (90% savings)
• Full inverter technology – stepless power adjustment 20-100% (automatically adjusts to outside temperature + pool temperature)
• Extremely quiet at 19 dB at 10m – inaudible even at night (neighbor hears nothing)
• Mitsubishi Inverter Compressor – Premium Component (durable, reliable)
• Titanium heat exchanger – saltwater and chlorine resistant (no corrosion)
• R32 refrigerant – more environmentally friendly (3x lower GWP than R410A)
• Integrated Wi-Fi and app – you set 28°C → the pump heats automatically
• Suitable for year-round use down to -15°C – also works in sub-zero temperatures (perfect for spring/autumn)
• Silent Mode – even quieter at night (automatic speed reduction)
• 7-year warranty – on compressor + heat exchanger (2 years on unit)

The result: You invest €3,500-€6,000 (depending on pool size, one-time investment) → Pool is usable for 5 months/year (instead of 6 weeks) → 3x longer usage → €50,000 pool investment is no longer just a decorative vase → Family swims May-September → Operating costs: €50-€80/month (like 2 coffees-to-go/day).

Saturday, May 5th, 10:00 AM. The weather is perfect (25°C, sunny). Without a heat pump: Pool water 19°C (cooled down overnight) → Children want to swim → "Dad, the water's too cold!" → They: "Come on, it's not THAT cold!" → Children: "No!" → Pool remains empty → €50,000 wasted . With Flotide PX: Pool water 27°C (heat pump heated overnight) → Children jump in → "Wow, perfect!" → They swim for 4 hours → €50,000 pool is USED → Family is happy.

The 5 most important advantages at a glance:

• COP 13.6 = 13x more efficient than an immersion heater : Immersion heater: 9 kW electricity → 9 kW heat (1:1, 100% electricity is wasted), heat pump: 1 kW electricity → 13.6 kW heat (1:13.6 – heat extracted from outside air), operating costs: €50-80/month (instead of €756 for an immersion heater – 90% saved), equivalent to 2 coffees to go/day (instead of 25/day for an immersion heater)
• Full inverter = stepless output 20-100% : On/Off heat pumps: Either 100% (loud, inefficient) or 0% (off), Full inverter: Stepless 20-100% (adapts: 30% for low heat demand, 80% for high demand), 50% quieter at partial load (20 dB instead of 40 dB), 50% more energy-efficient (runs constantly at low output instead of constantly on/off)
• Extremely quiet 19 dB at 10m = inaudible : On/Off heat pumps: 50-60 dB at 10m (audible like a normal conversation – annoys neighbors), Flotide PX: 19 dB at 10m distance (inaudible – quieter than a refrigerator, like a whisper), Silent Mode at night: even quieter (speed automatically reduced), neighborhood peace guaranteed
• 5 months of swimming season = 3x more use : Without a heat pump: 6-8 weeks of use (only July-August with lucky weather), With a heat pump: 5 months of use (May-September at a constant 26-28°C), 3x longer season (€50,000 pool investment is no longer just a decorative vase), children also swim in May and September (not just "when the weather is perfect")
• Suitable for year-round use down to -15°C = also in spring/autumn : Budget heat pumps: Only up to +5°C outside temperature (too cold in April/October → do not work), Flotide PX: Down to -15°C outside temperature (works even in sub-zero temperatures – thanks to inverter technology), April start possible (outside temperature 10°C → pump still heats pool to 26°C), October end possible (outside temperature 8°C → pump keeps pool at 24°C)

Who is this heat pump ideally suited for?

Reality check : The Flotide PX is for ROI maximizers + season extenders + families who want to save their €50,000 pool investment + 5 months of use + low operating costs – without cold shock, without end-of-summer blues.

✓ "ROI maximizers" – people who don't want their €50,000 pool investment to go to waste
They invested €50,000 in a pool (concrete, tiles, equipment, plants). Without a heat pump: the pool is only usable for 6-8 weeks a year (July-August, when the weather is perfect) → the rest of the year = an expensive decorative vase . ROI calculation: €50,000 ÷ 8 weeks of use = €6,250 per week of use . With a heat pump (€3,500-€6,000): the pool is usable for 20 weeks a year (May-September) → €50,000 + €5,000 = €55,000 ÷ 20 weeks = €2,750 per week (56% cheaper). The heat pump saves the pool's ROI.

✓ "Season Extender" – Families with end-of-summer blues
Your family lives for summer (the pool is the center of family life). Problem: End of August → water cools down (from 26°C to 21°C in 2 weeks) → beginning of September → children want to swim → water 19°C → "No, too cold!" → summer is over → family is sad ("Why does summer have to end already?"). With a heat pump: September → pump heats pool to 27°C → children swim until the end of September → summer is extended by 2 months → family is happy.

✓ People who can overcome cold shock (the "toe-in-water" fighters)
Even in the height of summer (July): In the morning, the water is 22-23°C (cooled overnight). You stand by the pool → cautiously dip your toe in → "Brrr!" → 5 minutes of hesitation → finally jump in → cold shock → it only becomes comfortable after 10 minutes. The same struggle every day. With a heat pump: The water is a constant 27°C (even in the morning) → you jump right in → no cold shock → immediately comfortable → no hesitation required.

✓ People who can do the math (don't want to pay €756/month for a heating element)
They considered: Buying an immersion heater (9 kW, €2,000) → electricity costs: €756/month → over a 3-month season: €2,268 electricity → unaffordable . Heat pump: COP 13.6 → 1 kW of electricity produces 13.6 kW of heat → operating costs: €50-80/month → over a 5-month season: €250-400 total → 90% cheaper than an immersion heater → pays for itself after 1-2 seasons.

✓ People with neighbors (who are sensitive to noise)
Your pool borders your neighbor's patio (5m distance). Budget heat pump (on/off): 50-60 dB at 10m → at 5m: 70 dB (as loud as a vacuum cleaner) → neighbor complains. Flotide PX: 19 dB at 10m → at 5m: 25 dB (as quiet as a whisper) → neighbor hears nothing → peace in the neighborhood.

✓ People with an affinity for smart home technology (who appreciate app control)
They love smart home technology (heating via app, lighting via app, blinds via app). They want to control their pool heat pump via app too (so they don't have to go to the pool every day). Flotide PX: Integrated Wi-Fi → App (iOS/Android) → You set a target temperature of 28°C → The pump heats automatically → You check the temperature from the sofa → Once it reaches 28°C → You go for a swim.

✓ People with saltwater pools (who need titanium)
Your pool uses salt electrolysis (instead of chlorine tablets → produces chlorine from salt). Problem: Saltwater is corrosive (attacks metal) → copper heat exchangers (in budget heat pumps) corrode after 3-5 years → leak → heat pump failure. Flotide PX: Titanium heat exchanger (saltwater-resistant, no corrosion) → 10-15 year lifespan even with saltwater.

✓ People who want to use April/May + September/October (early/late season)
You don't just want to swim in July and August → also in spring (April/May) and autumn (September/October). Problem: Outside temperature is 10-15°C (budget heat pumps don't work – too cold). Flotide PX: Suitable for year-round use down to -15°C → works even at 10°C outside temperature → heats the pool to 26°C in April → you can swim as early as the end of April → season starts 6 weeks earlier .

Product description: When air-source heat meets inverter magic

The concept: Heat pump = extracting heat from air (instead of burning electricity)

Electric heating element : 1 kW of electricity → is burned → generates 1 kW of heat (ratio 1:1 – inefficient).

Heat pump (Flotide PX): 1 kW electricity → extracts heat from outside air → generates 13.6 kW of heat (ratio 1:13.6 – 13x more efficient).

How does it work? (The physics behind it)

Outside air contains energy (even at 5°C outside temperature – air molecules move = energy). Heat pump:

1. Evaporator draws in outside air → refrigerant (R32) evaporates (absorbs heat from air)
2. Compressor (Mitsubishi Inverter) compresses refrigerant → temperature rises to 60-80°C
3. The heat exchanger (titanium) transfers heat to the pool water → the pool water gets warm.
4. Refrigerant cools down → cycle begins again.

Result: 1 kW of electricity (for compressor + fan) produces 13.6 kW of heat (heat drawn from air) → the magic of thermodynamics .

COP 13.6 – 13x more efficient than a heating element

COP = Coefficient of Performance (power factor) = How much heat is produced from 1 kW of electricity?

Flotide PX under ideal conditions (27°C outside temperature, 27°C pool target):

• COP 13.6 → 1 kW of electricity produces 13.6 kW of heat

Under realistic conditions (15°C outside temperature, 25°C pool target):

• COP 7.2 → 1 kW of electricity produces 7.2 kW of heat

In cold conditions (5°C outside temperature, 24°C pool target):

• COP 4-5 → 1 kW of electricity produces 4-5 kW of heat

Comparison:

Heating method	COP	1 kW of electricity becomes...
heating element	1.0	1 kW heat
Budget heat pump (On/Off)	4-6	4-6 kW heat
Flotide PX (Full-Inverter)	7-13.6	7-13.6 kW heat

Practical:

Heating a pool from 20°C to 28°C (32 m³ pool, 8°C temperature difference):

Heating element (9 kW): 9 kW x 24h = 216 kWh x €0.35 = €75.60 (heating for 1 day).

Flotide PX (at COP 7): 1.3 kW power consumption x 24h = 31 kWh x €0.35 = €10.85 (heating for 1 day) → 86% cheaper .

Full inverter = stepless power 20-100%

On/Off heat pumps (Budget): Either 100% (full throttle) or 0% (off) → like old heating (starts up with a bang, runs at full throttle, switches off, repeats).

Full-Inverter (Flotide PX): Stepless power 20-100% → like modern automatic car control (adapts to demand).

How does that work?

Inverter compressor (Mitsubishi) → variable speed (instead of fixed):

• Low heat demand (pool almost at target temperature) → compressor runs at 30% speed → quiet, energy-saving
• High heat demand (pool 8°C below target) → compressor runs at 100% speed → maximum heating output

Plus: Inverter fan (variable) → also adapts → at 30% power the fan runs slowly → even quieter .

Advantage:

On/Off heat pump: Runs at 100% (loud, 60 dB) → switches off → pool cools down → switches back on at 100% → constantly loud .

Full inverter: Runs at 20-40% in maintenance mode (quiet, 20-30 dB) → keeps pool temperature constant → never loud .

Power consumption:

On/Off: Constantly on/off → inefficient (every time it's switched on, it consumes energy).

Full inverter: Runs constantly at low power → 50% more energy-efficient (no constant on/off).

Extremely quiet at 19 dB at 10m – Inaudible even at night

Volume comparison:

Flotide PX at a distance of 10m:

• Full power (100%): 38 dB (as quiet as a refrigerator)
• Partial load (30%): 19 dB (as quiet as a whisper – practically inaudible)

Budget heat pump (On/Off) at 10m:

• Full throttle: 50-60 dB (as loud as a normal conversation – clearly audible)

Difference: Flotide PX is 30-40 dB quieter (at partial load) → dB scale is logarithmic → 10 dB = perceived as twice as loud → 30 dB = perceived as 8x quieter .

Why is the Flotide PX so quiet?

Inverter technology: Compressor + fan run at low speed (instead of full throttle) → less noise.

Silent Mode: At night (10:00 PM - 7:00 AM) → pump automatically reduces speed → even quieter (e.g. 15 dB at 10m) → neighbor sleeps undisturbed .

Practical:

Scenario: Your pool is adjacent to your neighbor's bedroom (10m distance). Budget heat pump runs at night: 55 dB → neighbor hears humming → complains. Flotide PX runs at night (Silent Mode): 15-19 dB → neighbor hears nothing → sleeps through the night → peace in the neighborhood .

Mitsubishi Inverter Compressor – Premium Component

Compressor = heart of the heat pump (compresses refrigerant → generates heat).

Budget heat pumps: Chinese compressor (manufacturer unknown) → quality varies → lifespan 5-10 years .

Flotide PX: Mitsubishi inverter compressor (world market leader, premium quality) → lifespan 15-20 years .

Advantage Mitsubishi:

Precision manufacturing: Tolerance ±0.001mm (German precision level) → less wear → longer lifespan .

Inverter technology: Variable speed (20-100%) → higher efficiency (COP 13.6 instead of 6) → 50% more energy-efficient .

7-year warranty: Mitsubishi offers a 7-year warranty on the compressor (budget: 2 years) → a sign of confidence in quality.

Titanium heat exchanger – saltwater resistant

Heat exchanger = Transfers heat from the refrigerant to pool water.

Budget heat pumps: Copper heat exchanger (cheap) → Problem: Copper corrodes in salt water (salt electrolysis) → after 3-5 years: Leak → Heat pump broken.

Flotide PX: Titanium heat exchanger (premium) → saltwater resistant (no corrosion) → chlorine resistant → 10-15 year lifespan even in saltwater.

Practical:

Saltwater pool with copper heat pump: After 4 years → green water (copper is dissolving) → heat exchanger leaking → heat pump broken → replacement needed (€3,000).

Saltwater pool with titanium heat pump: After 10 years → still running → no corrosion → no problems .

R32 refrigerant – more environmentally friendly

Refrigerant = medium that transports heat (evaporates/condenses in a cycle).

Old heat pumps: R410A refrigerant → GWP 2,088 (Global Warming Potential – greenhouse gas potential).

Flotide PX: R32 refrigerant → GWP 675 (3x lower than R410A) → more environmentally friendly .

Plus: R32 is more efficient (better heat transfer) → higher COP (13.6 instead of 10-12 for R410A).

EU-compliant: R32 meets EU F-Gas Regulation → future-proof (R410A is being phased out).

Wi-Fi + App – Smart Control

Integrated Wi-Fi module (no need to buy separately) → App (iOS/Android, free).

App features:

Setting the temperature: You select the target temperature (e.g. 28°C) → the pump heats automatically → once 28°C is reached → the pump switches to maintenance mode.

Select modes:

• Heating (pool gets warmer)
• Cooling (pool gets colder – in the height of summer when 32°C is too warm)
• Automatic (pump decides automatically – heats or cools as needed)

Silent Mode: Activate for nighttime use → Pump automatically reduces volume.

Timer: Program times (e.g. "Heating from 10:00-18:00" → off at night to save electricity).

Error diagnosis: The app displays error messages (e.g., "Flow too low" → you know immediately what the problem is).

Firmware updates: The app can update the pump (software improvements).

Suitable for year-round use down to -15°C – Even in winter

Budget heat pumps: Only function up to +5°C outside temperature (below this temperature → heat exchanger ices up → pump switches off).

Flotide PX: Works down to -15°C outside temperature (thanks to inverter technology + automatic defrost cycle).

How does that work?

Automatic defrosting: When the outside temperature drops below 5°C → evaporator ices up (outside air is too cold → condensate freezes) → pump switches over (heating mode is briefly reversed) → ice melts → pump switches back to heating → cycle repeats.

Practical:

April: Outside temperature 10°C (5°C at night). Budget heat pump: Doesn't work (too cold) → Pool stays at 18°C. Flotide PX: Works (heats even at 10°C outside temperature) → Pool is heated to 26°C → You can swim in April !

October: Outside temperature 12°C (8°C at night). Budget heat pump: Doesn't work → Pool cools down → Season ends. Flotide PX: Works → Pool stays at 24°C → You can swim until the end of October .

Technical specifications at a glance

Flotide Inverter PX Series

Available models:

Model		Pool volume	Heating output (A27/W27)	Tension
PX7/32		20-35 m³	3.25-7 kW	230V 1~
PX11/32		30-55 m³	5-11 kW	230V 1~
PX14/32		40-70 m³	6.5-14 kW	230V 1~
PX17/32		45-80 m³	3.25-16 kW	230V 1~
PX21/32		55-95 m³	9-21 kW	230V 1~
PX25/32		75-130 m³	11-25 kW	230V 1~
PX25T/32		75-130 m³	11-25 kW	400V 3~
PX30/32		100-175 m³	13-30 kW	230V 1~
PX30T/32		100-175 m³	13-30 kW	400V 3~

Example: Flotide PX17/32 (most popular model)

Heating output:

• For A27/W27: 3.25-16 kW (continuously adjustable)
• For A15/W25: 2.55-12.6 kW
• COP max.: 13.64 (at A27/W27)
• Realistic COP: 7.2 (for A15/W25)

Electrical data:

• Power consumption: 0.22-3.7 kW
• Voltage: 230V / 1-phase
• Fuse: 20A
• Soft start: Yes (no voltage spikes)

Hydraulic data:

• Recommended flow rate: 5.2 m³/h
• Connection: 50mm
• Heat exchanger: Titanium (saltwater resistant)

Volume:

• At a distance of 1m: 38-58 dB(A)
• At a distance of 10m: 19-38 dB(A) (even quieter under partial load)

Dimensions & Weight:

• Dimensions: 1,046 x 435 x 767mm (H x W x D)
• Weight: approx. 66 kg

Refrigerant:

• Type: R32 (environmentally friendly, GWP 675)
• EU compliant (F-Gas Regulation)

Operating area:

• Outdoor temperature: -15°C to +43°C
• Pool temperature: +8°C to +40°C
• Suitable for all year round

Steering:

• Display: LCD glass display (touch)
• Wi-Fi: Integrated (no extra costs)
• App: iOS/Android (free)
• Modes: Heating, Cooling, Auto, Silent Mode
• Timer: Programmable

Components:

• Compressor: Mitsubishi Inverter Scroll
• Heat exchanger: Titanium
• Fan: Variable speed (inverter)
• Housing: ABS (UV-resistant)

Guarantee:

• Device: 2 years
• Compressor: 7 years
• Heat exchanger: 7 years

Scope of delivery

✓ Flotide PX Inverter Heat Pump (fully assembled)
✓ LCD touch display (glass surface)
✓ Integrated Wi-Fi module
✓ Winter cover (protection when not in use)
✓ Installation & operating instructions (German)

Not included in the delivery:

• Connection hoses (50mm, from filter system to heat pump)
• Bypass set (for installation)
• Installation (professional recommended – refrigerant under pressure)

Why people choose the Flotide PX

"My pool was a €50,000 decorative vase (usable for only 6 weeks/year – July-August). With Flotide PX: usable for 5 months (May-September at 27°C). ROI saved."
– Mr. K., 52 years old, ROI maximizer

"Children wanted to swim in September (water 19°C – too cold). Flotide PX heats up to 27°C (even in September). Season extended by 2 months. Happy family."
– Ms. M., 48 years old, seasonal extender

"Before: cautiously dipping my toe in the water, 'Brrr!', 5 minutes of overcoming my fear. Now: a constant 27°C (even in the morning). I jump right in. No more cold shock."
– Mr. S., 55 years old, cold shock hater

"A heating element would have cost €756/month (electricity). Flotide PX: €60/month (COP 13.6 = 13x more efficient). 90% saved. Payback after 1.5 seasons."
– Mrs. L., 50 years old, computerist

"Pool borders neighbor's terrace. Budget heat pump: 60 dB (neighbor complained). Flotide PX: 19 dB at 10m (inaudible). Peace in the neighborhood."
– Mr. T., 58 years old, neighboring diplomat

Frequently Asked Questions – Honest Answers

Q: Is a heat pump (€4,500) worth it vs. solar film (€200)?
A: Yes (completely different functions). Solar cover: Prevents heat loss at night (retains 2-3°C of heat) – does NOT generate new heat → if the pool is 18°C ​​in May → the cover stays at 18°C ​​(does not heat up). Heat pump: Actively generates heat (heats from 18°C ​​to 28°C) → You need BOTH (heat pump heats, cover prevents heat loss).

Q: What are the monthly operating costs?
A: €50-80/month (for a 32 m³ pool, 26°C target temperature, May-September). Calculation: Pool requires approx. 2-4 kWh/day (maintenance mode – compensating for heat loss) → 2-4 kWh x 30 days = 60-120 kWh/month x €0.35 = €21-42/month (maintenance). Plus: Initial heating (May, from 18°C ​​to 26°C) = approx. 100-200 kWh one-time cost = €35-70 one-time cost . Total: €56-112/month (average over the season = €60-80/month ).

Q: How long does it take to heat up (from 20°C to 28°C)?
A: 2-4 days (depending on outside temperature and pool size). Example: 32 m³ pool, 20°C start, 28°C target (8°C difference), 15°C outside temperature. Flotide PX17: 12.6 kW heating capacity (at A15/W25) → 32 m³ x 1,163 Wh/m³/°C x 8°C = 298 kWh required ÷ 12.6 kW = 24 hours runtime (in continuous operation) = 1-2 days realistic (heat pump does not run at full power 24/7 – operates at partial load).

Q: Does it work at an outside temperature of 5°C (April)?
A: Yes (down to -15°C outside temperature). At 5°C outside temperature: COP drops (from 13.6 to approx. 4-5) → less efficient, but it works . Practically speaking: At 5°C outside, the pump heats the pool to 26°C (takes longer than at 15°C outside – but it works).

Q: Is installation complicated?
A: Professional installation recommended (not DIY). Why: The heat pump contains refrigerant under pressure (R32) → installation requires a refrigeration and air conditioning technician (certification necessary) → connection to a bypass system (between the filter and the pool) → electrical connection (20A fuse). Installation costs: €300-600 (professional, 4-6 hours of work).

Q: Do I need 3-phase (400V) or is 1-phase (230V) sufficient?
A: For pools up to 100 m³: 1-phase (230V) is sufficient (PX7-PX30 without "T"). For pools >100 m³: 3-phase (400V) recommended (PX25T, PX30T – "T" = three-phase current) → more power + lower current consumption per phase (distributes load).

Q: Can I also use the heat pump for cooling (in the height of summer)?
A: Yes (integrated cooling function). In the height of summer (August, 35°C outside temperature) → pool gets too warm (32°C – uncomfortable) → you activate cooling mode → pump cools pool to 28°C (comfortable). Practical: Rarely needed (only in extremely hot summers).

Save your €50,000 pool investment now + secure 5 months of season

If your pool is a decorative vase (6 weeks of use). If you hate cold shock. If you miss out on May and September. If you want to make your family happy (extend summer).

The Flotide Inverter PX is built for ROI maximizers + season extenders + families who don't want their €50,000 pool to go to waste + 5 months of swimming season + low operating costs (€60-80/month) – without cold shock, without heating element electricity costs (€756/month).

COP 13.6. Full inverter. 19dB.

👉 Order the Flotide PX inverter heat pump now

✓ 5 months of swimming season (May-September at 26-28°C)
✓ COP 13.6 (13x more efficient than a heating element)
✓ Operating costs €50-80/month (instead of €756 for a heating element)
✓ Full inverter (stepless 20-100%, 50% more energy-efficient)
✓ Extremely quiet 19 dB at 10m (inaudible even at night)
✓ Mitsubishi inverter compressor (15-20 year lifespan)
✓ Titanium heat exchanger (saltwater resistant)
✓ R32 refrigerant (3x more environmentally friendly than R410A)
✓ Wi-Fi + App (Smart control from the sofa)
✓ Suitable for year-round use down to -15°C (also April/October)
✓ 7-year warranty (compressor + heat exchanger)

Or would it be better to seek advice first?

👉 Request a free consultation

✓ Non-binding
✓ Which PX size is right for your pool?
✓ Operating cost calculation
✓ Installation support

27°C. No toe test. Jump right in.

The Flotide PX isn't "a heat pump." It's your pool's salvation . Your season extension. Your cold-shock elimination. Full inverter technology like a premium air conditioner. Mitsubishi quality like a luxury car. The heart of your usable pool – quiet, efficient, and absolutely reliable.

Your heated pool. Your 5-month season. Your Flotide PX.